0
S70KS1282GABHA020
  • S70KS1282GABHA020

S70KS1282GABHA020

Active and preferred

S70KS1282GABHA020 is a 128 Mb HYPERRAM self-refresh DRAM (PSRAM) for high-bandwidth code or frame buffering, using a HYPERBUS interface with 8-bit DDR DQ[7:0], CS#, RESET#, and RWDS data strobe. It supports 200 MHz clock, up to 35 ns tACC, and up to 400 MBps throughput, with configurable linear or wrapped bursts and optional DCARS. The 1.8 V-only device runs from 1.7 V to 2.0 V, AEC-Q100 Grade 3 (-40°C to +85°C), in 24-ball FBGA.

Infineon Technologies S70KS1282GABHA020 Product Info

16 April 2026 3

Parameters

Density

128 MBit

Family

KS-2

Initial Access Time

35 ns

Interface Bandwidth

400 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 200

Interfaces

HYPERBUS

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 85 °C

Operating Voltage range

1.7 V to 2 V

Operating Voltage

1.8 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Automotive

Technology

HYPERRAM

Features

  • HYPERBUS interface
  • 1.7 V to 2.0 V VCC option
  • 2.7 V to 3.60 V VCC option
  • 8-bit DDR data bus (DQ[7:0])
  • 200 MHz maximum clock rate
  • Up to 400 MBps throughput
  • 35 ns maximum access time (tACC)
  • Wrapped bursts 16/32/64/128 B
  • RWDS strobe and write data mask
  • DCARS option shifts RWDS phase
  • Hybrid sleep retains data
  • Deep power down stops refresh

Description

  • High bandwidth with few pins
  • Fits 1.8 V or 3.0 V logic rails
  • DDR bus reduces system pin count
  • 200 MHz supports fast processors
  • 400 MBps feeds high-rate buffers
  • 35 ns tACC reduces read latency
  • Burst sizes match cache-line needs
  • RWDS eases DDR timing closure
  • DCARS improves read eye margin
  • Hybrid sleep cuts power, keeps data
  • DPD minimizes leakage when off
  • Clock-stop lowers stall current

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request