0
S70KL1282GABHI023
  • S70KL1282GABHI023

S70KL1282GABHI023

Active and preferred

S70KL1282GABHI023 is a 128 Mb HYPERRAM self-refresh DRAM (PSRAM) with HYPERBUS interface, CS#, RESET#, RWDS, and an 8-bit DDR DQ[7:0] bus. It supports 200 MHz clocking for up to 400 MBps throughput (3,200 Mbps) and 35 ns max access time. Operating ranges are 2.7 V to 3.60 V supply and -40°C to +85°C (Industrial). Supported power modes include hybrid sleep and deep power down. It comes in a 24-ball FBGA (5 x 5, 1.00 mm pitch).

Infineon Technologies S70KL1282GABHI023 Product Info

16 April 2026 5

Parameters

Density

128 MBit

Family

KL-2

Initial Access Time

35 ns

Interface Bandwidth

400 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 200

Interfaces

HYPERBUS

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 85 °C

Operating Voltage range

2.7 V to 3.6 V

Operating Voltage

3 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Industrial

Technology

HYPERRAM

Features

  • HYPERBUS interface
  • 1.7 V to 2.0 V VCC option
  • 2.7 V to 3.60 V VCC option
  • 8-bit DDR data bus (DQ[7:0])
  • 200 MHz maximum clock rate
  • Up to 400 MBps throughput
  • 35 ns maximum access time (tACC)
  • Wrapped bursts 16/32/64/128 B
  • RWDS strobe and write data mask
  • DCARS option shifts RWDS phase
  • Hybrid sleep retains data
  • Deep power down stops refresh

Description

  • High bandwidth with few pins
  • Fits 1.8 V or 3.0 V logic rails
  • DDR bus reduces system pin count
  • 200 MHz supports fast processors
  • 400 MBps feeds high-rate buffers
  • 35 ns tACC reduces read latency
  • Burst sizes match cache-line needs
  • RWDS eases DDR timing closure
  • DCARS improves read eye margin
  • Hybrid sleep cuts power, keeps data
  • DPD minimizes leakage when off
  • Clock-stop lowers stall current

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request