0
S70KL1281DABHV020
  • S70KL1281DABHV020

S70KL1281DABHV020

The S70KL1281DABHV020 is a 128 Mb (16 MB) HyperRAM self-refresh DRAM with a HyperBus slave interface using an 8-bit DDR data bus (16-bit word addressing). It supports up to 100 MHz operation at 3.0 V and sustained linear-burst bandwidth to 200 MBps. RWDS indicates refresh latency and provides read strobe/write mask, with wrapped or linear bursts. Device is offered in a 24-ball FBGA package.

Infineon Technologies S70KL1281DABHV020 Product Info

16 April 2026 2

Parameters

Density

128 MBit

Family

KL-1

Initial Access Time

40 ns

Interface Bandwidth

200 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 100

Interfaces

HYPERBUS

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 105 °C

Operating Voltage range

2.7 V to 3.3 V

Operating Voltage

3 V

Peak Reflow Temp

260 °C

Technology

HYPERRAM

Features

  • HyperRAM low-signal-count interface
  • 8-bit DDR data bus (DQ[7:0])
  • 11/12 interface signals (VIO)
  • Up to 166 MHz clock at 1.8 V
  • Up to 100 MHz clock at 3.0 V
  • Up to 333 MBps peak bandwidth
  • RWDS strobe with mask function
  • Wrapped burst 16/32/64/128 bytes
  • Linear and hybrid burst options
  • Deep Power Down mode (DPD)
  • 1.7 V to 1.95 V supply range
  • 2.7 V to 3.6 V supply range

Description

  • Cuts MCU pin count vs parallel DRAM
  • DDR boosts throughput per clock
  • Simplifies routing with fewer traces
  • 166 MHz supports fast memory reads
  • 100 MHz fits 3.0 V host designs
  • 333 MBps supports rich HMI assets
  • RWDS eases timing, masks writes
  • Burst options optimize bus efficiency
  • Linear bursts fit streaming access
  • DPD reduces standby power drain
  • Wide 1.8 V supply eases power tree
  • Wide 3.0 V supply fits legacy rails

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request