Product
0
S25HL02GTDPBHM053
  • S25HL02GTDPBHM053

S25HL02GTDPBHM053

Active and preferred

The S25HL02GTDPBHM053 is a 2 Gb SEMPER™ NOR Flash memory using Infineon's 45-nm MIRRORBIT™ technology for high endurance, supporting up to 2,560,000 program-erase cycles and 25 years retention. It features Quad SPI interface with SDR up to 166 MHz (83 MBps) and DDR up to 102 MHz (102 MBps), ISO26262 ASIL B compliance, ECC, CRC, and SafeBoot. Operating from 2.7 V to 3.6 V, it is AEC-Q100 Grade 1 qualified and housed in a 24-ball BGA package for automotive and industrial use.

Infineon Technologies S25HL02GTDPBHM053 Product Info

16 April 2026 0

Parameters

Classification

ISO 26262-compliant

Density

2 GBit

Family

HL-T

Interface Bandwidth

66 MByte/s

Interface Frequency (SDR/DDR) (MHz)

133 / 66

Interfaces

Quad SPI

Lead Ball Finish

Sn/Ag/Cu

Operating Temperature range

-40 °C to 125 °C

Operating Voltage range

2.7 V to 3.6 V

Operating Voltage

3 V

Peak Reflow Temp

260 °C

Planned to be available until at least

2037

Qualification

Automotive

Apps

Data center power solutions, Domain controller for ADAS & autonomous driving

Features

  • Embedded ECC corrects 1-bit, detects 2-bit
  • Endurance flex: configurable wear leveling
  • Hardware CRC for data integrity check
  • Multiple data protection: LBP, ASP, SSR
  • SafeBoot for microcontroller failure recovery
  • Quad SPI, Dual I/O, QPI, SDR/DDR support
  • Page programming up to 512 bytes
  • Suspend/resume for program/erase ops
  • Four reset methods: hardware, POR, CS#, SW
  • Deep power down mode for low standby current
  • Wide VCC: HL-T 2.7–3.6 V, HS-T 1.7–2.0 V
  • Industrial temperature: –40°C to +85°C

Description

  • ECC ensures reliable data storage and reads
  • Wear leveling extends flash memory lifespan
  • CRC enables fast integrity verification
  • Flexible protection prevents accidental data
  • SafeBoot allows device recovery after faults
  • High-speed interfaces boost data throughput
  • Large page programming improves efficiency
  • Suspend/resume enables system responsiveness
  • Multiple resets enhance system robustness
  • DPD mode reduces power for battery devices
  • Supports broad supply and application needs
  • Operates reliably in harsh environments

Subscribe to Welllinkchips !
Your Name
* Email
Popular Posts
Featured Parts More >
Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8