0
MAX8717
  • MAX8717

MAX8717

PRODUCTION

Interleaved High-Efficiency, Dual Power-Supply Controllers for Notebook Computers Dual, Step-Down, Interleaved, Fixed-Frequency, Switch-Mode Power-Supply (SMPS) Controllers with Synchronous Rectification for Notebook Computers

Analog Devices MAX8717 Product Info

10 February 2026 6

Features

  • Fixed Switching Frequency
    • 200kHz, 300kHz, or 500kHz
    • 250kHz, 300kHz, or 400kHz (MAX8756 Only)
  • No Current-Sense Resistor Required
  • 40/60 Optimal Interleaving
  • Reduced Input-Capacitor Requirement
  • Output Voltage Fixed or Adjustable Outputs (Dual Mode™)
    • 3.3V/5V Fixed or 1V to 5.5V Adjustable
    • 1.5V/1.8V Fixed or 1V to 2.3V Adjustable (MAX8756 Only)
  • 4V to 26V Input Range
  • Independently Selectable PWM, Skip, and Low-Noise Mode Operation
  • Soft-Start and Soft-Stop
  • 2V Precision Reference with 0.75% Accuracy
  • Independent Power-Good Outputs

Part details & applications

The MAX8716/MAX8717/MAX8756/MAX8757 are dual, step-down, interleaved, fixed-frequency, switch-mode power-supply (SMPS) controllers with synchronous rectification. The MAX8716/MAX8717/MAX8756/MAX8757 are intended for main (5V/3.3V) power generation, while the MAX8756 is optimized for I/O power rails in battery-powered systems.

Fixed-frequency operation with optimal interleaving minimizes input ripple current from the lowest input voltages up to the 26V maximum input. Optimal 40/60 interleaving allows the input voltage to go down to 8.3V before duty-cycle overlap occurs in 5V/3.3V applications, compared to 180° out-of-phase regulators where the duty-cycle overlap occurs when the input drops below 10V.

Accurate output current limit is achieved using a sense resistor. Alternatively, power dissipation can be reduced using lossless inductor current sensing. Independent ON/OFF controls and power-good signals allow flexible power sequencing. Soft-start reduces inrush current, while soft-stop gradually ramps the output voltage down preventing negative voltage dips.

A low-noise mode maintains high light-load efficiency while keeping the switching frequency out of the audible range.

The MAX8716 is available in a 24-pin thin QFN package, and the MAX8717/MAX8756/MAX8757 are available in a 28-pin thin QFN package.

Applications

  • 2 to 4 Li+ Cell Battery-Powered Devices
  • Main or I/O Power Supplies
  • Notebook and Subnotebook Computers
  • PDAs and Mobile Communicators

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request