0
LTC4001-1
  • LTC4001-1
  • LTC4001-1
  • LTC4001-1

LTC4001-1

PRODUCTION

2A Synchronous Buck Li-Ion Charger

Analog Devices LTC4001-1 Product Info

10 February 2026 3

Features

  • Low Power Dissipation
  • 2A Maximum Charge Current
  • No External MOSFETs, Sense Resistor or Blocking Diode Required
  • Remote Sensing at Battery Terminals
  • Programmable Charge Termination Timer
  • Preset 4.1V Float Voltage with ±0.5% Accuracy
  • 4.1V Float Voltage Improves Battery Life and High Temperature Safety Margin
  • Programmable Charge Current Detection/Termination
  • Automatic Recharge
  • Thermistor Input for Temperature Qualified Charging
  • Compatible with Current Limited Wall Adapters
  • Low Profile 16-Lead (4mm × 4mm) QFN Package

The LTC4001-1 is a 2A Li-Ion battery charger intended for 5V wall adapters. It utilizes a 1.5MHz synchronous buck converter topology to reduce power dissipation during charging. Low power dissipation, an internal MOSFET and sense resistor allow a physically small charger that can be embedded in a wide range of handheld applications. The LTC4001-1 includes complete charge termination circuitry, automatic recharge and a ±1% 4.1V float voltage. Input short-circuit protection is included so no blocking diode is required.

This 4.1V version of the standard LTC4001 is intended for applications which will be operated or stored above approximately 60°C. Under these conditions, the reduced float voltage will trade-off initial cell capacity for the benefit of increased capacity retention over the life of the battery. A reduced float voltage also minimizes swelling in prismatic and polymer cel

Part details & applications

The LTC4001-1 is a 2A Li-Ion battery charger intended for 5V wall adapters. It utilizes a 1.5MHz synchronous buck converter topology to reduce power dissipation during charging. Low power dissipation, an internal MOSFET and sense resistor allow a physically small charger that can be embedded in a wide range of handheld applications. The LTC4001-1 includes complete charge termination circuitry, automatic recharge and a ±1% 4.1V float voltage. Input short-circuit protection is included so no blocking diode is required.

This 4.1V version of the standard LTC4001 is intended for applications which will be operated or stored above approximately 60°C. Under these conditions, the reduced float voltage will trade-off initial cell capacity for the benefit of increased capacity retention over the life of the battery. A reduced float voltage also minimizes swelling in prismatic and polymer cells, and avoids open CID (pressure fuse) in cylindrical cells.

Battery charge current, charge timeout and end-of-charge indication parameters are set with external components. Additional features include shorted cell detection, temperature qualified charging and overvoltage protection. The LTC4001-1 is available in a low profile (0.75mm) 16-lead (4mm × 4mm) QFN package.