0
TPS610981DSET Texas Instruments PMIC - Voltage Regulators - Linear + Switching image
  • TPS610981DSET Texas Instruments PMIC - Voltage Regulators - Linear + Switching image
Images are for reference only

Texas Instruments TPS610981DSET

Manufacturer
Texas Instruments
Mfr. Part #
TPS610981DSET
WLX Part #
A22507080053
Package
6-WFDFN
Datasheet
TPS610981DSET Datasheet (PDF)

Recommended For You

TPS610981DSET Parameter Description

The TPS61098x is an ultra-low power solution for products powered by either a one-cell or two-cell alkaline, NiCd or NiMH, one-cell coin cell or one-cell Li-Ion or Li-polymer battery. It integrates either a Low-dropout Linear Regulator (LDO) or a load switch with a boost converter and provides two output rails. The boost output V(MAIN) is designed as an always-on supply for a main system, and the LDO or load switch output V(SUB) is to power peripheral devices.

The TPS61098x has two modes controlled by the MODE pin: Active mode and Low Power mode. In Active mode, both outputs are enabled with enhanced response performance. In Low Power mode, the LDO or load switch is disabled to disconnect peripherals. The TPS61098x consumes only 300-nA quiescent current and can achieve up to 88% efficiency at 10-µA load in Low Power mode.

The TPS61098x supports automatic pass-through function. When input voltage is higher than a pass-through threshold, the boost converter stops switching and passes the input voltage to the VMAIN rail; when input voltage is lower than the threshold, the boost works in Boost mode and regulates the output at the target value. The TPS61098x provides different versions for different output set values.

The TPS61098x can provide up to 50-mA total output current at 0.7-V input to 3.3-V output conversion. The boost is based on a hysteretic controller topology using a synchronous rectifier to obtain maximum efficiency at minimal quiescent current.

The TPS61098x is available in 1.5-mm × 1.5-mm WSON package to enable small circuit layout size.


Purchase Guide

1. Send Enquiry
You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.

sales@welllinkchips.com




2. Receive a quote
You will receive an email with the price, quantity and delivery date of the product you need

3. Payment
You can pay the orders by wire transfer offline. We support: Paypal,VISA.
Please fill the shipping address and express information when placing your order. We support: UPS,DHL,Fedex,SF


Shipping & Delivering

1. Shipping & Delivering
After receiving your payment, we will ship the goods for you within the delivery period and send the shipping number by email

2. Shipping cost already shown on the quote, please check your email.

3.We will evaluate the shipping cost according to the price of the product you purchased and the shipping address. If you need to specify the shipping method, you can notify us by email.

4. We support DHL, FedEx, UPS, SF to ship your goods by default



5.Regarding in stock parts, orders can generally be ready to ship within 4 hours.
We ship daily at 5pm.(UTC/GMT+8)
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
DHL Express, 5-7 business days.

The following are some common countries' logistic time.



Note: 

The above table is for reference only, there may will have some delay for the uncontrollable factors.




Refund & Return
Refund
Refunds are normally accepted within 30 days from the date of the parcel delivered. Please contact our support team for any issues immediately once you receive your parcels includes but is not limited to below reasons:
Not received the parcel normally
Yes, we guarantee a refund or to resend your order if you haven't received the parcel beyond the regular shipping days, except the case which customer takes the responsibility for the unsuccessful delivery such as providing an incorrect shipping address, can not complete the customs clearance due to customer's reason, etc. Note: If the following issues occurs: extreme weather, post office delay, customs clearance, local protest, etc. In this case, we are incapable of guaranteeing on-time delivery, but we'll try our best to support you,thanks.
Some items missing from my shipment
First, check that you've received all the boxes associated with your order. Then fully empty each box you received, sometimes small parts get caught in crevices or in packing material. If you still can't find your item, please email customer service right away. Include a description of the missing quantities and pictures of the whole parcel. We'll forward them to our warehouse to check the monitor records and the packing pictures records. Steps:
1. Send email to support team for authorization.
2. We'll check and verify the issues.
3. Offer solutions to customer case by case.
Return
By returning products to WELL LINK CHIPS, the Customer certifies that the products were purchased from WELL LINK CHIPS and there has been no substitution in whole or part of the same product from another supplier, distributor or other such sources of the product. The return should be in the original packaging and in unused condition (except defective). ESD or moisture-sensitive products should not be opened except under controlled conditions. General Rules: Returns are normally accepted within 365 days from the date of the parcel delivered. When a customer requests a return due to 'non-original/fake/quality problems', a valid quality report from a third-party authoritative organization recognized by our company is required for the return and exchange. Any charges from customs and other fees should be paid by customers if the return reason is customers' reason, such as buy parts mistakenly,etc. Return Freight charges must be prepaid; we will not accept COD shipments.
  • *
Welllink Chips’ quality control process is carried out in strict accordance with the ISO9001 international quality management system, and quality risks are controlled and reduced through strict supplier control measures + quality testing and other measures.
Supplier level control (Qualified suppliers, provisional suppliers and blacklisted suppliers)
Graded
management
Regular
assessment
Dynamic
management
  • Qualified suppliers
  • Original manufacturers, authorised agents, suppliers without quality incidents.
  • Provisional suppliers
  • Upgrade only if suppliers have passed the profile audit and have worked together 3 times or more without quality incidents.
  • Blacklisted suppliers
  • There is the sale of counterfeit and refurbished parts and the defaulting supplier will be permanently blacklisted.
Quality testing (QC process according to international standards to guarantee product quality)
Testing process:
Primary testing
Labels and outer packaging
Secondary testing
Appearance and electrical properties
Tertiary testing
Slicing, open cap, solderability, ambient temperature, ageing, X-RAY, ultrasound
  • External Visual Inspection

  • Electrical performance testing

  • Key functional testing

  • Key functional testing

  • Slice testing

  • X-RAY Inspection

Stock: 10 PCS

Please send RFQ , we will respond immediately.

Product browsing history

Submit a request