Product
0
MAX15096DGWE+T Analog Devices Inc. PMIC - Hot Swap Controllers image
  • MAX15096DGWE+T Analog Devices Inc. PMIC - Hot Swap Controllers image
Images are for reference only

Analog Devices Inc. MAX15096DGWE+T

Manufacturer
Analog Devices Inc.
Mfr. Part #
MAX15096DGWE+T
WLX Part #
A22507007707
Package
16-WFBGA, WLBGA
Datasheet
MAX15096DGWE+T Datasheet (PDF)
SEND E-mail Add To RFQ List

Recommended For You

MAX15096DGWE+T Parameter Description

The MAX15096 family of devices are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane.They can also be used as electronics circuit breaker for hard drive and solid-state drive and fans. The devices integrate a hot-swap controller, 12mΩ (typ) power MOSFET, and an electronic circuit-breaker protection in a single package.

The devices are designed for protection of 2.7V to 18V supply voltages. These devices implement a foldback current limit during startup to control inrush current, lowering di/dt and keeping the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, PG goes low and the devices latch off (MAX15096) or automatic retry (MAX15096A); the output could also be discharged after a fault event (MAX15096D).

The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have an undervoltage/overvoltage input pin (UVOV) that can detect an undervoltage/overvoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection and a power-good output (PG).

The devices are available in a 16-bump, 2mm x 2mm wafer-level package (WLP) and are rated over the -40°C to +105°C extended temperature range.

Applications

  • Blade Servers
  • Disk Drive Power
  • Industrial A

Purchase Guide

1. Send Enquiry
You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.

sales@welllinkchips.com




2. Receive a quote
You will receive an email with the price, quantity and delivery date of the product you need

3. Payment
You can pay the orders by wire transfer offline. We support: Paypal,VISA.
Please fill the shipping address and express information when placing your order. We support: UPS,DHL,Fedex,SF


Shipping & Delivering

1. Shipping & Delivering
After receiving your payment, we will ship the goods for you within the delivery period and send the shipping number by email

2. Shipping cost already shown on the quote, please check your email.

3.We will evaluate the shipping cost according to the price of the product you purchased and the shipping address. If you need to specify the shipping method, you can notify us by email.

4. We support DHL, FedEx, UPS, SF to ship your goods by default



5.Regarding in stock parts, orders can generally be ready to ship within 4 hours.
We ship daily at 5pm.（UTC/GMT+8）
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
DHL Express, 5-7 business days.

The following are some common countries' logistic time.



Note: 

The above table is for reference only, there may will have some delay for the uncontrollable factors.




Refund & Return
Refund
Refunds are normally accepted within 30 days from the date of the parcel delivered. Please contact our support team for any issues immediately once you receive your parcels includes but is not limited to below reasons:
Not received the parcel normally
Yes, we guarantee a refund or to resend your order if you haven't received the parcel beyond the regular shipping days, except the case which customer takes the responsibility for the unsuccessful delivery such as providing an incorrect shipping address, can not complete the customs clearance due to customer's reason, etc. Note: If the following issues occurs: extreme weather, post office delay, customs clearance, local protest, etc. In this case, we are incapable of guaranteeing on-time delivery, but we'll try our best to support you,thanks.
Some items missing from my shipment
First, check that you've received all the boxes associated with your order. Then fully empty each box you received, sometimes small parts get caught in crevices or in packing material. If you still can't find your item, please email customer service right away. Include a description of the missing quantities and pictures of the whole parcel. We'll forward them to our warehouse to check the monitor records and the packing pictures records. Steps:
1. Send email to support team for authorization.
2. We'll check and verify the issues.
3. Offer solutions to customer case by case.
Return
By returning products to WELL LINK CHIPS, the Customer certifies that the products were purchased from WELL LINK CHIPS and there has been no substitution in whole or part of the same product from another supplier, distributor or other such sources of the product. The return should be in the original packaging and in unused condition (except defective). ESD or moisture-sensitive products should not be opened except under controlled conditions. General Rules: Returns are normally accepted within 365 days from the date of the parcel delivered. When a customer requests a return due to 'non-original/fake/quality problems', a valid quality report from a third-party authoritative organization recognized by our company is required for the return and exchange. Any charges from customs and other fees should be paid by customers if the return reason is customers' reason, such as buy parts mistakenly,etc. Return Freight charges must be prepaid; we will not accept COD shipments.
  • *
SUBMIT
Welllink Chips’ quality control process is carried out in strict accordance with the ISO9001 international quality management system, and quality risks are controlled and reduced through strict supplier control measures + quality testing and other measures.
Supplier level control (Qualified suppliers, provisional suppliers and blacklisted suppliers)
Graded
management
Regular
assessment
Dynamic
management
  • Qualified suppliers
  • Original manufacturers, authorised agents, suppliers without quality incidents.
  • Provisional suppliers
  • Upgrade only if suppliers have passed the profile audit and have worked together 3 times or more without quality incidents.
  • Blacklisted suppliers
  • There is the sale of counterfeit and refurbished parts and the defaulting supplier will be permanently blacklisted.
Quality testing (QC process according to international standards to guarantee product quality)
Testing process:
Primary testing
Labels and outer packaging
Secondary testing
Appearance and electrical properties
Tertiary testing
Slicing, open cap, solderability, ambient temperature, ageing, X-RAY, ultrasound

  • External Visual Inspection

  • Electrical performance testing

  • Key functional testing

  • Key functional testing

  • Slice testing

  • X-RAY Inspection

Stock: Contact to confirm inventory

Please send RFQ , we will respond immediately.

Quick RFQ

Product browsing history

Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8