0
HV830LG-G Microchip Technology PMIC - Lighting, Ballast Controllers image
  • HV830LG-G Microchip Technology PMIC - Lighting, Ballast Controllers image
Images are for reference only

Microchip Technology HV830LG-G

Manufacturer
Microchip Technology
Mfr. Part #
HV830LG-G
WLX Part #
A224260008576
Package
8-SOIC (0.154", 3.90mm Width)
Datasheet
HV830LG-G Datasheet (PDF)

HV830LG-G Parameter Description

HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0 to 9.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±100V. The chip can be enabled by connecting the resistors on the RSW-Osc and REL-Osc pins to the VDD pin, and disabled when connected to GND. The HV830 has two internal oscillators, a switching MOSFET and a high-voltage EL lamp driver. The frequency of the switching converter MOSFET is set by an external resistor connected between the RSW-Osc and the VDD pins. The EL lamp driver frequency is set by an external resistor connected between the REL-Osc and the VDD pins. An external inductor is connected between the LX and VDD pins. A 0.01µF to 0.1µF capacitor is connected between the CS pin and the GND. The EL lamp is connected between the VA and VB pins. The switching MOSFET charges the external inductor and discharges it into the CS capacitor. The voltage at CS will start to increase. Once the voltage at CS reaches a nominal value of 100V, the switching MOSFET is turned OFF to conserve power. The output pins VA and VB are configured as an H-bridge and are switched in opposite states to achieve 200V peak-to-peak across the EL lamp.

Purchase Guide

1. Send Enquiry
You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.

sales@welllinkchips.com




2. Receive a quote
You will receive an email with the price, quantity and delivery date of the product you need

3. Payment
You can pay the orders by wire transfer offline. We support: Paypal,VISA.
Please fill the shipping address and express information when placing your order. We support: UPS,DHL,Fedex,SF


Shipping & Delivering

1. Shipping & Delivering
After receiving your payment, we will ship the goods for you within the delivery period and send the shipping number by email

2. Shipping cost already shown on the quote, please check your email.

3.We will evaluate the shipping cost according to the price of the product you purchased and the shipping address. If you need to specify the shipping method, you can notify us by email.

4. We support DHL, FedEx, UPS, SF to ship your goods by default



5.Regarding in stock parts, orders can generally be ready to ship within 4 hours.
We ship daily at 5pm.(UTC/GMT+8)
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
DHL Express, 5-7 business days.

The following are some common countries' logistic time.



Note: 

The above table is for reference only, there may will have some delay for the uncontrollable factors.




Refund & Return
Refund
Refunds are normally accepted within 30 days from the date of the parcel delivered. Please contact our support team for any issues immediately once you receive your parcels includes but is not limited to below reasons:
Not received the parcel normally
Yes, we guarantee a refund or to resend your order if you haven't received the parcel beyond the regular shipping days, except the case which customer takes the responsibility for the unsuccessful delivery such as providing an incorrect shipping address, can not complete the customs clearance due to customer's reason, etc. Note: If the following issues occurs: extreme weather, post office delay, customs clearance, local protest, etc. In this case, we are incapable of guaranteeing on-time delivery, but we'll try our best to support you,thanks.
Some items missing from my shipment
First, check that you've received all the boxes associated with your order. Then fully empty each box you received, sometimes small parts get caught in crevices or in packing material. If you still can't find your item, please email customer service right away. Include a description of the missing quantities and pictures of the whole parcel. We'll forward them to our warehouse to check the monitor records and the packing pictures records. Steps:
1. Send email to support team for authorization.
2. We'll check and verify the issues.
3. Offer solutions to customer case by case.
Return
By returning products to WELL LINK CHIPS, the Customer certifies that the products were purchased from WELL LINK CHIPS and there has been no substitution in whole or part of the same product from another supplier, distributor or other such sources of the product. The return should be in the original packaging and in unused condition (except defective). ESD or moisture-sensitive products should not be opened except under controlled conditions. General Rules: Returns are normally accepted within 365 days from the date of the parcel delivered. When a customer requests a return due to 'non-original/fake/quality problems', a valid quality report from a third-party authoritative organization recognized by our company is required for the return and exchange. Any charges from customs and other fees should be paid by customers if the return reason is customers' reason, such as buy parts mistakenly,etc. Return Freight charges must be prepaid; we will not accept COD shipments.
  • *
Welllink Chips’ quality control process is carried out in strict accordance with the ISO9001 international quality management system, and quality risks are controlled and reduced through strict supplier control measures + quality testing and other measures.
Supplier level control (Qualified suppliers, provisional suppliers and blacklisted suppliers)
Graded
management
Regular
assessment
Dynamic
management
  • Qualified suppliers
  • Original manufacturers, authorised agents, suppliers without quality incidents.
  • Provisional suppliers
  • Upgrade only if suppliers have passed the profile audit and have worked together 3 times or more without quality incidents.
  • Blacklisted suppliers
  • There is the sale of counterfeit and refurbished parts and the defaulting supplier will be permanently blacklisted.
Quality testing (QC process according to international standards to guarantee product quality)
Testing process:
Primary testing
Labels and outer packaging
Secondary testing
Appearance and electrical properties
Tertiary testing
Slicing, open cap, solderability, ambient temperature, ageing, X-RAY, ultrasound
  • External Visual Inspection

  • Electrical performance testing

  • Key functional testing

  • Key functional testing

  • Slice testing

  • X-RAY Inspection

Stock: 6 PCS

Please send RFQ , we will respond immediately.

Product browsing history

Submit a request