0
Microchip's SmartConnect ATWILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.
The ATWILC1000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC1000 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The only external clock source needed is a high-speed crystal or oscillator.
The ATWILC1000 can be used in Linux, RTOS or Baremetal Environments.
The ATWILC1000 driver is part of the Mainline Linux Kernel beginning in version 5.9.
The WILC1000 Linux driver development is now an integrated development under the Linux4sam.org project.
The current stable release can be found at https://github.com/linux4microchip/linux/tree/linux-5.10-mchp/drivers/net/wireless/microchip/wilc1000
The current development branch can be found at https://github.com/linux4sam/linux-at91/tree/master/drivers/staging/wilc1000
The WILC demo, serial bridge and firmware are hosted at github.com/linux4wilc
Additionally WILC1000 driver can be found at Linux.org in the Kernel mainline under driver/net/wireless/microchip.
Microchip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.
*The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Looking for a chip level solution? Check out the IC solution here ATWILC1000-IC
sales@welllinkchips.com


The above table is for reference only, there may will have some delay for the uncontrollable factors.



Analog Devices Inc.
In Stock:0
Analog Devices Inc.
In Stock:48
Microchip Technology
In Stock:0
Renesas Electronics America Inc
In Stock:0
onsemi
In Stock:2493
JAE
In Stock:0
Molex
In Stock:32
TE Connectivity
In Stock:40